HCR1500 Series II General Specifications

SpecificationsHCR1500-ED II / HCR1500-D20 II
Weight & dimensions US Standard Metric
Operating weight with fuel/oil (with ROPS/FOPS cab if applicable) 39,286 lb / 40,616 lb 17,820 kg / 18,420 kg
Overall length 32'-10" / 33'-5.5" 10,010 mm / 10,200 mm
Ground contact length 9'-1" / 9'-5" 2,780 mm / 2,865 mm
Overall width with pre-cleaner 12'-2" / 12'-8" 3,720 mm / 3,860 mm
Overall width 7'-10.5" 2,400 mm
Width of shoe 13" 330 mm
Overall height shipping 11' / 11'-2" 3325 mm / 3,400 mm
Drifter
Model HD715 II
Weight 551 lb 250 kg
Impact rate 2,250 - 2,500 bmp
Number of rotations 0 - 150 rpm
Undercarriage
Ground clearance 20.4" / 19.2" 515 mm / 495 mm
Oscillating angle ±7.5° deg
Travel speed 0 - 2.6 mph 0 - 4.2 km/h
Max grade of hill climb 57.7 (30°) %
Engine
Make/model CATERPILLAR® / C9
Type Turbocharged and air to air after cooled diesel,
direct fuel injection, electronic governor.
Rated output 348hp / 2200rpm 260kw / 2200rpm
  Meets Tier III and EU stage-3
Low-emission, low fuel consumption Tier III Caterpillar® engine meets major exhaust emissions regulations in US and Europe.
Net usable output available at flywheel of the installed engine with all the standard accessories. SAEJ1349, SAEJ1995 conditions.
Piston displacement 2.3 gal 8.8 liter
Fuel tank capacity 166 gal 630 liter
Hydraulic pump
Type 2-variable displacement axial piston pumps; largest for travel, impact and feed, smaller for drifter rotation. 3-gear pumps for cooling and dust collector, boom and rod changer.
Hydraulic oil tank capacity 63 gal 240 liter

 

SpecificationsHCR1500-ED II / HCR1500-D20 II
  US Standard Metric
Compressor AIRMAN®
Model PDS290-S15B
Free air delivery 476.4 CFM 13.5 m3/min
Working air pressure 149 psi 1.03 MPa
Boom
Model JE326-142 / JE325-141
Lift angle (up-down) 45° - 20° / 45° - 25°
Swing angle (right-left) 38° - 7° / 35° - 7°
Extension length 2.9 ft 900 mm
Guide shell
Model GH885-41 / GH830-51
Length 26'-2" / 33'-5" 8,000 mm / 10,200 mm
Feed length 26'-2" / 33'-5" 4,700 mm / 6,763 mm
Swing angle (right-left) 38° - 38° / 25° - 90°
Tilt angle 170°
Maximum pulling force 6,969 lbs 31kN
Dust collector
Suction capacity 1,400 CFM 40 m3/min
Number of filter 6
Rod arrangement
Type Rod changer
Number of rods 6 + 1 / 4 + 1 (starter rod)
Bit and rod
Bit diameter 3.5" - 5" 89 mm - 127 mm
Type of bit Cross, Button, Spike
Rod size 51R
Rod length 12' / 20' 3,660 mm / 6,100 mm
Starter rod length 14' / 20' 4,300 mm / 6,100 mm

 

The contents of these specifications are subject to change without notice.