PCR 200 / PCR 200 DTH Specifications
| PCR-200 | US Standard | Metric |
|---|---|---|
| Weight | 1,102 lb | 5,000 kg |
| Overall length | 17'- 9" | 5,400 mm |
| Feed travel | 12' | 3,710 mm |
| Track length | 8'- 5" | 2,580 mm |
| Length of ground contact | 6'- 1" | 1,885 mm |
| Tow hitch height | 1'- 9.5" | 550 mm |
| Overall width | 7'- 9.5" | 2,390 mm |
| Track width | 7'- 3" | 2,200 mm |
| Width of grousers | 1" | 300 mm |
| Overall height ( Boom lowered) |
4'- 2" | 1,250 mm |
| Ground clearance | 11" | 280 mm |
| Crawler traction | ||
| Ground pressure | .45 kg/cm2 | |
| Traveling speed (towing a compressor on level ground) | 1.9 mph | 3.2 km/h |
| Grade ability | 22° | |
| Oscillating angle | 15° | |
| Traction air motor (Model MR13, piston-type) | 8,8 kW | |
| Guide Shell | ||
| Max. horizontal drill height | 10" | 3,050 mm |
| Guide slide travel | 3'- 11" | 1,200 mm |
| Air feed motor (Model MC2) | 4 kW | |
| Steel change | 10" | 3,050 mm |
| Hydraulic Units | ||
| Boom length | 6'- 6" | 2,000 mm |
| Boom lift ( up / down ) | 45°/25° | |
| Boom swing ( right / left ) | 45°/45° | |
| Guide swing (right / left) (95° right, 15 °left with pin change) |
50° / 50° | |
| Guide tilt (without pin change) | 180° | |
| Power pump (Model MP12) | 4 kW | |
| Drifter ( Model PD200 ) | ||
| Weight without shank rod | 396 lb | 180kg |
| Length without shank rod | 3'- 3.5" | 1,020 mm |
| Cylinder diameter | 5.1" | 130 mm |
| Piston stroke | 3.1" | 80 mm |
| Air consumption | 565 CFM | 16 cbm |
| Blows / min | ~ 1,600 | |
| Main air hose connection | 2" | 50 mm |
| PCR-200 DTH | US Standard | Metric |
|---|---|---|
| Overall length | 18'-10" | 5,750 mm |
| Overall width | 7'-10" | 2,390 mm |
| Overall width (without operator step) | 7'- 4.5" | 2,250 mm |
| Overall height (Boom lowered) | 4'- 5.5" | 1,360 mm |
| Track length | 8'- 5.5" | 2,580 mm |
| Length of ground contact | 6'- 2" | 1,885 mm |
| Width of grousers | 11.8" | 300 mm |
| Ground clearance | 11" | 280 mm |
| Crawler traction | ||
| Machine weight (without hammer & rod) | 10,934 lb | 4,960 kg |
| Travelling speed | 2.7 mph | 3,5 km/h |
| Traction air motor | 8,8 kW | |
| Grade ability (without compressor) | 34° | |
| Oscillating angle | 15° | |
| Rotary head | ||
| Air motor & reduction gear | ||
| Weight | 429.9 lb | 195 kg |
| Max. torque | 2 kN
|
|
| Guide Shell | ||
| Length | 18'-10" | 5,750 mm |
| Feed travel | 13 ft | 3,980 mm |
| Max. pulling force | 14 kN | |
| Feed system | ||
| Air feed motor / Chain feed | 3,7 kW | |
| Hydraulic Units | ||
| Power pump | 3,7 kW | |
| Operating pressure | 2,495 psi | 172 bar |
| Hydraulic fluid tank capacity | 4.5 gal | 17 litre |
| Supply air requirement | ||
| Air pressure (Max.) | 290 psi | 20 bar |
| Air flow rate (Min.) | 22 m3/min | |
| Inlet size | 2 in | 51 mm |
| Drill rod | ||
| Rod length | 9'-10" | 3,000 mm |
| Rod diameter | 3" | 76 mm |
| Hammer | ||
| Size | 3" - 4" | 76 - 102 mm |
| Weight | 83.7 lb | 38 kg |
| Length | 43" | 1,098 mm |
| Diameter | 3.8" | 93 mm |
| Bit gauge | 4" - 5" | 95 - 127 mm |
